Petal Lounge Chair is a representative work of MZGF heading to international
aesthetics. The design features ergonomic body and modernist
work, and gets inspired by Lotus Petal. The craft combines the beauty and unique
shape create extraordinary appearance and structural function which becomes the
highlight of the living space.
General care instruction for solid wood furniture
1, How to avoid scratches
Wipe the furniture with a soft cotton cloth.Use cushions when dismount furniture.Please be careful when touch the hard objects.Do not use sandpaper to polish the nitro paint furniture.
2, How to remove the water stains
Spilled fluids need to be wiped-up immediately. Use coasters when the container need to be placed for a long time Avoid the acid / alkaline liquid (nail polish / detergent / soda).
3, How to reduce cracking
Avoid the direct sunlight, and for indoor use only. Try to keep the temperature / humidity stable, and use humidifier under heating season / air conditioning.All synthetic resin surfaces are sensitive to heat. Keep the solid wood away from the heat source (hot soup / notebook computer / radiator etc.)
Furniture cleaning instructions
Wood products:Remove dust from the surface regularly by vacuuming or wiping with a damp soft cloth.
Cloth products: Use the vacuum cleaners to remove dust. Machine wash them by warm water under 40 degrees, iron them with low temperature, and do not dry clean.
Pull out the sofa sets, clean them after being zipped.
Leather products: Wipe the surface with a damp soft cloth, air dry them naturally.
Marble products: Remove the surface dust by dry soft cloth. Use a neutral detergent to maintain its gloss, but need to be wiped –up immediately.
Stainless steel products:Clean with dry soft cloth, use a neutral detergent to remove stains.
Protect the surface with wax oil
1, Use the 320 sandpaper grind the damage part in the direction of the fibers until the mark has disappeared.
2, If the crack is obvious, fill it up with the wood powder polished by sandpaper, and drop No.502 glue, wait for a while and wipe it again with sandpaper, adjust the transitions over a large area.
3, Clean up the wood powder.Polish it again with 600 sandpaper in the direction of the fibers.
4, emove dust from the surface and get ready for the wax oil.Drop the wax oil on the surface of the furniture, wipe it by the cotton with oil along the grain direction (Gloves recommended).
5, Wipe off the excess oil on the surface of the furniture in 15 minutes.
6, To have a better effect, you can apply the process once or twice more after 3 hours.